I designed TPS61085-Q1 circuit by WEBENCH in the following condition.
Vin: 3.3V
Vout: 10V
Iout: 0.35A
However this was not successful. I think this use condition is no problem for TPS61085-Q1 if Fsw is set 650kHz. According to datasheet efficiency curve, I think 1.2MHz has no problem too.
Then I changed oscillator frequency to 650kHz, however it was not reflected in design.
If it is possible, I want to set switching frequency at first use condition setting.
Best Regards,
Kohei Sasaki