Part Number: TIDA-01570
Hi,
I want to collect raw data of TIDA-01570 using DCA1000.
I have connected the LVDS interface and serial port (The TX and RX pin on the J4).
SOP0 and SOP1 has been set to 1， SOP2 has been set to 0 .
Other operations are exactly the same as using AWR1642BOOST.
But when I connect RS232 in mmWaveStudio, the following error occurs：
[10:03:09] [RadarAPI]: Error: Connection failed: Calling_ConnectTarget returned 3
It seems that the serial connection failed, but I have already connected the configuration serial port (The TX and RX pin on the J4).
Do I need to connect the data serial port as well? I noticed that the data serial port (same pins as AWR1642BOOST) is connected to the CAN transceiver.
Thank you
eehzux